SCALARWORKS

Materials 7075-T6 Aluminum / 4140H Steel Finishes Type III Anodizing / Flash Nitride Center height over rail 1.57" Ring diameter 30mm Cant 0MOA Overhang 2.0" Weight 154g Origin United States of America Mount Scalarworks® Leap™...

SPECS Materials: 7075-T6 Aluminum / 4140H SteelFinishes: Type III Anodizing / Flash NitrideCenter height over rail: 1.93"Ring diameter: 30mmCant: 0MOAOverhang: 2.0"Weight: 163gOrigin: United States of America

Materials 7075-T6 Aluminum / 4140H Steel Finishes Type III Anodizing / Flash Nitride Center height over rail 1.57" Ring diameter 34mm Cant 0MOA Overhang 2.0" Weight 154g Origin United States of America Mount Scalarworks® Leap™...

Materials 7075-T6 Aluminum / 4140H Steel Finishes Type III Anodizing / Flash Nitride Center height over rail 1.93" Ring diameter 34mm Cant 0MOA Overhang 2.0" Weight 165g Origin United States of America Mount Scalarworks® Leap™...

Materials 7075-T6 Aluminum / 4140H Steel Finishes Type III Anodizing / Flash Nitride Center height over rail 1.42" Co-Witness Absolute Weight 42g Origin United States of America Mount Scalarworks® Leap™ (SW0300) Tools T10 Torx...

Materials 7075-T6 Aluminum / 4140H Steel Finishes Type III Anodizing / Flash Nitride Center height over rail 1.57" Co-Witness Lower-Third Weight 1.55oz Origin United States of America Mount Scalarworks® Leap™ (SW0310) Tools T10...

SPECS Materials: 7075-T6 Aluminum / 4140H SteelFinishes: Type III Anodizing / Flash NitrideCenter height over rail: 1.93"Co-Witness: NoneWeight: 1.65ozOrigin: United States of America COMPATIBILITY Rails: MIL-STD-1913 PicatinnyAimpoint reflex sights:...

Allow for near-seamless integration between your Aimpoint ACRO and shotgun with the Scalarworks SYNC Mount. The SYNC mount puts the optic's dot reticle at the ideal shooting position allowing for intuitive target acquisition. Every Sync...

TBA

TBA

Materials 7075-T6 Aluminum / 4140H Steel Finishes Type III Anodizing / Flash Nitride / Black Nitride Center height over rail 1.42" Ring diameter 30mm Weight 2.87oz Origin United States of America Mount Scalarworks® Leap™...

SPECS Materials 7075-T6 Aluminum / 4140H Steel Finishes Type III Anodizing / Flash Nitride / Black Nitride Center height over rail 1.93" Ring diameter 30mm Weight 3.24oz Origin United States of America COMPATIBILITY Rails MIL-STD-1913...

These sight screws are custom made for Scalarworks in the USA. They are cold-headed and heat-treated to HRC 39-45, and feature a corrosion resistant Black Oxide finish. All Scalarworks sight screws have a Torx T10 socket to minimize the chances of...

Our driver bits are hammer-forged from S2 tool steel and finished off with a corrosion resistant Black Oxide finish, and laser etched Scalarworks logo. Scalarworks driver bits are specifically designed to function with all height Leap mounts. They are...

Our driver bits are hammer-forged from S2 tool steel and finished off with a corrosion resistant Black Oxide finish, and laser etched Scalarworks logo. Scalarworks driver bits are specifically designed to function with all height Leap mounts. They are...

Materials 7075-T6 Aluminum / 4140H Steel Finishes Type III Anodizing / Flash Nitride Center height over rail 1.42" Adjustments 0.5MOA/Click @ 15" sight radius Adjustment range 51MOA elevation @ 15" sight radius Sight post 0.053" width -...

Materials 7075-T6 Aluminum / 4140H Steel Finishes Type III Anodizing / Flash Nitride Center height over rail 1.42" Adjustments 0.5MOA/Click @ 15" sight radius Adjustment range 46MOA windage @ 15" sight radius Flip apertures Same-plane 0.07"/0...

SPECS Materials: 7075-T6 Aluminum / 4140H Steel / 17-4 StainlessFinishes: Type III Anodizing / Flash NitrideCenter height over rail: 1.75"Adjustments: 0.5MOA/Click @ 15" sight radiusAdjustment range: 46MOA windage @ 15" sight radius=Flip apertures:...

SPECS Materials: 7075-T6 Aluminum / 4140H SteelFinishes: Type III Anodizing / Flash NitrideCenter height over rail: 1.42" (36mm)Adjustments: 0.5MOA/Click @ 15" sight radiusAdjustment range: 51MOA elevation @ 15" sight radiusSight post: 0.053" width -...

SPECS Materials: 7075-T6 Aluminum / 4140H Steel / 17-4 StainlessFinishes: Type III Anodizing / Flash NitrideCenter height over rail: 1.75"Adjustments: 0.5MOA/Click @ 15" sight radiusAdjustment range: 46MOA windage @ 15" sight radiusFlip apertures:...

SPECS Materials: 7075-T6 Aluminum / 4140H Steel / 303 StainlessFinishes: Type III Anodizing / Flash NitrideCenter height over rail: 1.42" (36mm)Adjustments: 0.5MOA/Click @ 15" sight radiusAdjustment range: 51MOA elevation @ 15" sight radiusSight post: 0...

Every Leap Mount is CNC milled from 7075-T6 billet, which has vastly superior mechanical properties to 6061-T6, and is used where ultimate strength and durability outweigh cost considerations. Designed for shooters who want the lightest, strongest, and...

LEAP Mount for Aimpoint PRO is designed for shooters who want the lightest, strongest, and most compact quick-detach optic mount possible. Features Engineered to be the lightest Aimpoint PRO QD mount, without compromising an ounce of strength. The...

LEAP/ Scope Mount is an ultra high-performance scope mount that is designed for shooters who want the lightest, most rigid, and most compact quick-detach scope mount possible. Features The Scalarworks Ring was designed from the ground up to be stiffer,...

The LEAP Aimpoint Pro Absolute Co-Witness Mount is designed for shooters who want the lightest, strongest, and least obtrusive quick-detach optic mount possible. The mount returns to zero on every re-installation, and holds zero under the heaviest recoil...

Designed for shooters who want the lightest, strongest, and least obtrusive quick-detach optic mount possible. The Leap Mount returns to zero on every re-installation, and holds zero under the heaviest recoil. Nylok treated sight screws and...

Designed for shooters who want the lightest, strongest, and least obtrusive quick-detach optic mount possible. The Leap Mount returns to zero on every re-installation, and holds zero under the heaviest recoil. Guaranteed. A highly efficient clamp design...

The Scalarworks Edition LensPen MiniPro is a perfectly sized cleaning tool for reflex sights and scopes. It’s compact size makes it easy and convenient to stash in a range bag or tool box. It features a unique non-slip matte black finish with...

CNC machined in the USA from 6061-T6 aluminum, and finished in Type II anodizing with laser engraved Scalarworks logo. The LevelDrive screw is designed and made specifically to fit precisely in our LEAP scope mounts with LevelDrive socket.

The Scalarworks Aimpoint Compm4 Low Drag Mount's monolithic base employs an efficient 4 pillar design that puts the bulk of its mass at the bottom and outer edges; where impact forces are highest.  Available in Absolute and Lower 1/3 Co-Witness...

The Scalarworks Low Drag Mount for Aimpoint Micro's monolithic base employs an efficient 4 pillar design that puts the bulk of its mass at the bottom and outer edges; where impact forces are highest. This mount is lower 1/3 co-witness. For compatible...

The Scalarworks Low Drag Trijicon RMR Mount's monolithic base employs an efficient 4 pillar design that puts the bulk of its mass at the bottom and outer edges; where impact forces are highest. Available in Lower 1/3 Co-Witness. Features Contoured edges...

SPECS Materials: 7075-T6 AluminumFinishes: Type III AnodizingAngle from rifle bore: 35°Weight: 18g (including fasteners)Origin: United States of America COMPATIBILITY Scalarworks Scope Mounts: SW0810, SW0820, SW0910, SW0920.Aimpoint reflex sights:...

Materials 7075-T6 Aluminum Finishes Type III Anodizing Angle from rifle bore 35° Weight 18g (including fasteners) Mount Scalarworks® Kick™ (SW1800) Fasteners M4x0.7 - 16mm flat-head (Nylok® treated) Tools T10 Torx driver...

SPECS Materials: 7075-T6 AluminumFinishes: Type III AnodizingAngle from rifle bore: 35°Weight: 20g (including bolts)Origin: United States of America COMPATIBILITY Scalarworks Scope Mounts: SW0810, SW0820, SW0910, SW0920Trijicon reflex sights: RM01,...

Materials 7075-T6 Aluminum Finishes Type III Anodizing Angle from rifle bore 35° Weight 20g (including fasteners) Origin United States of America Mount Scalarworks® Kick™ (SW1700) Fasteners M4x0.7 - 16mm flat-head (Nylok®...

Designed for discerning shooters who want the familiarity of classic AR-15 fixed iron sights, while demanding modern features, refined styling, and world class build quality. Every major component is custom designed with meaningful improvements to...

SPECS Materials: 7075-T6 Aluminum/4140H SteelFinishes: Type III AnodizingHeight Above Rail: 17.5mm (0.69in)Weight: 60g (including fasteners)Origin: United States of America COMPATIBILITY Rails: Mil-Std-1913Length: 93.2mm (3.67") INCLUDED Mount:...

Our Rail Screws are CNC machined in the USA from 4140 Heat Treated CroMoly steel, and finished in corrosion resistant Black Oxide. Each screw has a Nylok® Torq-Patch® applied to the threads. Nylok® Torq-Patch® is a self-locking...